Description
MÀN HÌNH DEEPSEA 7320 MKII
– Bộ Điều Khiển 7320
– Bộ Điều Khiển 7320 MKII
– Bộ Điều Khiển DeepSea 7320
– Bộ Điêu Khiển DeepSea 7320 MKII
– Bộ Điều Khiển Máy Phát DSE 7320
– DeepSea 7320
– DSE 7320
– Màn hình 7320
– Màn hình 7320 MKII
– Màn Hình DSE 7320
– Màn Hình DeepSea 7320
– Màn Hình DeepSea 7320 mkii
– Màn Hình DeepSea DSE 7320
INTALLATION INSTRUCTIONS DSE7310 MKII & DSE7320 MKII
1.ACCESSING THE MAIN CONFIGURATION EDITOR:
• Ensure the engine is at rest and the module is in STOP mode by pressing the (Stop/Reset) button.
• Press the (Stop/Reset) and (Tick) buttons simultaneously.
• If a module security PIN has been set, the PIN number request is then shown:
• The first ‘#’ changes to ‘0’. Press the (Up) or (Down) button to adjust it to the correct value.
• Press the (Right) button when the first digit is correctly entered. The digit previously entered now shows ‘#’ for security.
• Repeat this process for the other digits of the PIN number. Press the (Left) button to move back to adjust one of the previous digits.
• When the (Tick) button is pressed after editing the final PIN digit, the PIN is checked for validity. If the number is not correct, the PIN must be re-entered.
• If the PIN has been successfully entered (or the module PIN has not been enabled), the editor is displayed:
2.EDITING A PARAMETER:
• Enter the editor as described above.
• Press the (Right) or (Left) buttons to cycle to the section to view/change.
• Press the (Up) or (Down) buttons to select the parameter to view/change within the currently selected section.
• To edit the parameter, press the (Tick) button to enter edit mode. The parameter begins to flash to indicate editing.
• Press the (Up) or (Down) buttons to change the parameter to the required value.
• Press the (Tick) button to save the value. The parameter ceases flashing to indicate that it has been saved.
• To exit the editor and save the changes, press and hold the (Tick) button.
• To exit the editor and not save the changes, press and hold the (Stop/Reset) button.
3.TYPICAL WIRING DIAGRAM:
Sơ đồ đấu nối Bộ điều khiển máy phát điện DeepSea 7320 MKII

Chuyên cung cấp màn hình máy phát điện, Màn hình DeapSea, Màn hình Caterpillar, Màn hình Comap, Màn hình Smartgen, Màn hình Datakom, Màn hình hòa đồng bộ,……..; Phụ tùng sữa chữa đại tu máy thủy Mitsubishi, Phụ tùng Cummins, Phụ tùng Caterpillar, Phụ tùng Johndeere chính hãng,………
4.Liên hệ để có giá tốt nhất:
CÔNG TY TNHH KỸ THUẬT CÔNG NGHỆ HPC
Website: www.hpc-vn.com | Email: hiep@hpc-vn.com
DĐ: 0908.577.177
Hiệp –
màn hình chính hãng, giá tốt